Stainless Steel Landig Ceiling Mounted Chiller Unit

The Landig ceiling mounted chiller unit installs into the ceiling of your cold room, leaving all four walls clear for shelving, rails, racking, or display. Same LaPlus circulating air cooling and same three power classes as the side mounted range – but with a footprint that sits above head height and out of the way.

Commonly chosen for:

• Butchery rooms with rails on multiple walls
• Cheese maturing rooms and cheese caves where aesthetics and hygiene matter
• Wine cellars and retail wine storage
• Farm shops with visible cold rooms
• Compact cold rooms where wall space is already spoken for

Choose your model

LD 700 – 700W cooling capacity. Cold rooms up to 8m³. Typical use: small cheese cave, boutique charcuterie room, private wine cellar, estate game larder.

LD 1100 – 1100W cooling capacity. Cold rooms up to 12m³. Typical use: butcher shop with rails on multiple walls, farm shop cold room, small brewery cold store, florist cold room.

LD 2000 – 2000W cooling capacity. Cold rooms up to 23m³. Typical use: commercial butchery, large cheese maturing room, commercial wine storage, brewery cold store with multi-side access.

Performance figures assume an ambient temperature of +25°C. In hotter surroundings, size up.

What you can store

Temperature range 0°C to +15°C standard, -5°C to +15°C on request. Suitable for:

1. Game, venison, butchery meat – 2-4°C
2. Charcuterie – 8-15°C by stage
3. Cheese maturing – 8-14°C (ceiling mounted is particularly popular here for cleanliness and looks)
4. Wine storage – 10-14°C
5. Craft beer, lagering, kegs – 1-6°C
6. Cut flowers – 2-5°C
7. Farm shop chilled goods – 2-5°C

Key features

• R290 propane refrigerant – natural, efficient, low global warming potential
• 50%+ energy saving vs previous Landig generations
• Evaporator-free interior – more usable cold room space
• LaPlus circulating air cooling – even distribution from above, which suits tall racks and hanging product
• Stainless steel housing – hygienic and built to commercial standard
• Electronic temperature control – precise temperature setting
• Automatic condensation evaporation – no drip pans to manage
• Maintenance-free – no routine servicing costs
• Plug-in design – pre-charged, seals against gasket, drops into ceiling cut-out
• Made in Germany by Landig – 40+ years’ manufacturing heritage
• 2-year manufacturer warranty

Specification

Art.Nr. Model Cooling capacity Operating voltage Size ceiling cut-out (W x D) Dimensions device in mm (W x D x H) Max. fully insulated cold room size A23011 LD 700 700 watts 230 V 400 x 350 780 x 418 x 300 8.0 m³ A23015 LD 1100 1100 watts 230 V 400 x 350 800 x 418 x 400 12.0 m³ A23016 LD 2000 2000 watts 230 V 400 x 450 910 x 515 x 400 23.0 m³

Before you order – structural requirements

Your cold room must meet these conditions:

1. Fully insulated – floor, walls and ceiling – minimum 8cm sandwich panels
2. Ceiling thickness at the cut-out point: 250mm maximum
3. Professional insulated cold room door fitted
4. Adequate space above the ceiling for the unit to sit (check unit height against your roof/plant void)
5. Room volume within the chosen model’s rated capacity

Building the cold room from scratch? See our [LINK: /product-category/cold-room/] self-assembly larder kits, or the side mounted version if ceiling access above the cold room is limited.

Installation, warranty and UK support

Pre-charged with refrigerant and ready to drop in. Your builder or joiner cuts the ceiling opening to the correct size, the unit seats into the opening, and the gasket seals it against the cold room ceiling. Plug into 230V and run.

• 2-year manufacturer warranty from date of purchase
• UK support from Tarrant Refrigeration
• Landig manufacturer service network available

Need sizing advice or specification help? Get in touch or book a consultancy call.

Frequently asked questions about ceiling mounted chiller units

Why choose ceiling mounted over side mounted?

Three reasons: wall space, access, and aesthetics. If your cold room has hanging rails or shelving on every wall, side mounting isn’t an option. If the room is accessed from multiple sides, a ceiling unit keeps both entrances unblocked. And in retail or customer-facing cold rooms – cheese caves, wine cellars, farm shops – the ceiling mount looks cleaner.

What sits above the unit?

The cooling unit body sits above your cold room ceiling, in a plant void, roof space, or next room. You need clearance above for the unit height (300-400mm depending on model) and for service access.

Can I fit this to a cold room with no roof space above?

If there’s no void above the ceiling, ceiling mount won’t work – you’ll need the side mounted version instead.

Is the installation much harder than side mounted?

No. The work is the same – cut opening, drop unit in, plug in power. The only extra is ensuring the ceiling structure can support the unit weight and that there’s service access from above.

Do I need a refrigeration engineer?

No. The unit is plug-in and pre-charged. A builder or joiner handles the cut-out; no gas work is required.